Skip to content

Merge request approval policies

DETAILS: Tier: Ultimate Offering: GitLab.com, Self-managed, GitLab Dedicated

  • Group-level scan result policies introduced in GitLab 15.6.
  • Scan result policies feature was renamed to merge request approval policies in GitLab 16.9.

NOTE: Scan result policies feature was renamed to merge request approval policies in GitLab 16.9.

Use merge request approval policies to enforce project-level settings and approval rules based on scan results. For example, one type of scan result policy is a security approval policy that allows approval to be required based on the findings of one or more security scan jobs. Merge request approval policies are evaluated after a CI scanning job is fully executed and both vulnerability and license type policies are evaluated based on the job artifact reports that are published in the completed pipeline.

NOTE: Merge request approval policies are applicable only to protected target branches.

NOTE: When a protected branch is created or deleted, the policy approval rules synchronize, with a delay of 1 minute.

The following video gives you an overview of GitLab merge request approval policies (previously scan result policies):

Requirements and limitations

  • You must add the respective security scanning tools. Otherwise, merge request approval policies cannot get evaluated and the corresponding approvals stay required.
  • The maximum number of merge request approval policies is five per security policy project.
  • Each policy can have a maximum of five rules.
  • All configured scanners must be present in the merge request's latest pipeline. If not, approvals are required even if some vulnerability criteria have not been met.
  • Merge request approval policies evaluate findings and determine approval requirements based on the job artifact reports published in a completed pipeline. However, merge request approval policies do not check the integrity or authenticity of the scan results generated in the artifact reports.

Merge request with multiple pipelines

A project can have multiple pipeline types configured. A single commit can initiate multiple pipelines, each of which may contain a security scan.

  • In GitLab 16.3 and later, the results of all completed pipelines for the latest commit in the merge request's source and target branch are evaluated and used to enforce the merge request approval policy. On-demand DAST pipelines are not considered.
  • In GitLab 16.2 and earlier, only the results of the latest completed pipeline were evaluated when enforcing merge request approval policies.

If a project uses merge request pipelines, you must use the latest security templates so that the security scanning jobs are present in the pipeline. For more information see Use security scanning tools with merge request pipelines.

Merge request approval policy editor

NOTE: Only project Owners have the permissions to select Security Policy Project.

Once your policy is complete, save it by selecting Configure with a merge request at the bottom of the editor. This redirects you to the merge request on the project's configured security policy project. If a security policy project doesn't link to your project, GitLab creates such a project for you. Existing policies can also be removed from the editor interface by selecting Delete policy at the bottom of the editor.

Most policy changes take effect as soon as the merge request is merged. Any changes that do not go through a merge request and are committed directly to the default branch may require up to 10 minutes before the policy changes take effect.

The policy editor supports YAML mode and rule mode.

NOTE: Propagating merge request approval policies created for groups with a large number of projects take a while to complete.

Merge request approval policies schema

The YAML file with merge request approval policies consists of an array of objects matching the merge request approval policy schema nested under the approval_policy key. You can configure a maximum of five policies under the approval_policy key.

NOTE: Merge request approval policies were defined under the scan_result_policy key. Until GitLab 17.0, policies can be defined under both keys. Starting from GitLab 17.0, only approval_policy key is supported.

When you save a new policy, GitLab validates its contents against this JSON schema. If you're not familiar with how to read JSON schemas, the following sections and tables provide an alternative.

Field Type Required Possible values Description
approval_policy array of Merge Request Approval Policy true List of merge request approval policies (maximum 5).

Merge request approval policy schema

  • The approval_settings fields were introduced in GitLab 16.4 with flags named scan_result_policies_block_unprotecting_branches, scan_result_any_merge_request, or scan_result_policies_block_force_push. See the approval_settings section below for more information.
Field Type Required Possible values Description
name string true Name of the policy. Maximum of 255 characters.
description string false Description of the policy.
enabled boolean true true, false Flag to enable (true) or disable (false) the policy.
rules array of rules true List of rules that the policy applies.
actions array of actions false List of actions that the policy enforces.
approval_settings object false Project settings that the policy overrides.
fallback_behavior object false Settings that affect invalid or unenforceable rules.

scan_finding rule type

  • The merge request approval policy field vulnerability_attributes was introduced in GitLab 16.2 with a flag named enforce_vulnerability_attributes_rules. Generally available in GitLab 16.3. Feature flag removed.
  • The merge request approval policy field vulnerability_age was introduced in GitLab 16.2.
  • The branch_exceptions field was introduced in GitLab 16.3 with a flag named security_policies_branch_exceptions. Generally available in GitLab 16.5. Feature flag removed.
  • The vulnerability_states option newly_detected was removed in GitLab 17.0 and the options new_needs_triage and new_dismissed were added to replace it.

This rule enforces the defined actions based on security scan findings.

Field Type Required Possible values Description
type string true scan_finding The rule's type.
branches array of string true if branch_type field does not exist [] or the branch's name Applicable only to protected target branches. An empty array, [], applies the rule to all protected target branches. Cannot be used with the branch_type field.
branch_type string true if branches field does not exist default or protected The types of protected branches the given policy applies to. Cannot be used with the branches field. Default branches must also be protected.
branch_exceptions array of string false Names of branches Branches to exclude from this rule.
scanners array of string true sast, secret_detection, dependency_scanning, container_scanning, dast, coverage_fuzzing, api_fuzzing The security scanners for this rule to consider. sast includes results from both SAST and SAST IaC scanners.
vulnerabilities_allowed integer true Greater than or equal to zero Number of vulnerabilities allowed before this rule is considered.
severity_levels array of string true info, unknown, low, medium, high, critical The severity levels for this rule to consider.
vulnerability_states array of string true [] or detected, confirmed, resolved, dismissed, new_needs_triage, new_dismissed All vulnerabilities fall into two categories:

Newly Detected Vulnerabilities - Vulnerabilities identified in the merge request branch itself but that do not currently exist on the default branch. This policy option requires a pipeline to complete before the rule is evaluated so that it knows whether vulnerabilities are newly detected or not. Merge requests are blocked until the pipeline and necessary security scans are complete. The new_needs_triage option considers the status

• Detected

The new_dismissed option considers the status

• Dismissed

Pre-Existing Vulnerabilities - these policy options are evaluated immediately and do not require a pipeline complete as they consider only vulnerabilities previously detected in the default branch.

Detected - the policy looks for vulnerabilities in the detected state.
Confirmed - the policy looks for vulnerabilities in the confirmed state.
Dismissed - the policy looks for vulnerabilities in the dismissed state.
Resolved - the policy looks for vulnerabilities in the resolved state.

An empty array, [], covers the same statuses as ['new_needs_triage', 'new_dismissed'].
vulnerability_attributes object false {false_positive: boolean, fix_available: boolean} All vulnerability findings are considered by default. But filters can be applied for attributes to consider only vulnerability findings:

• With a fix available (fix_available: true)

• With no fix available (fix_available: false)
• That are false positive (false_positive: true)
• That are not false positive (false_positive: false)
• Or a combination of both. For example (fix_available: true, false_positive: false)
vulnerability_age object false N/A Filter pre-existing vulnerability findings by age. A vulnerability's age is calculated as the time since it was detected in the project. The criteria are operator, value, and interval.
- The operator criterion specifies if the age comparison used is older than (greater_than) or younger than (less_than).
- The value criterion specifies the numeric value representing the vulnerability's age.
- The interval criterion specifies the unit of measure of the vulnerability's age: day, week, month, or year.

Example: operator: greater_than, value: 30, interval: day.

license_finding rule type

This rule enforces the defined actions based on license findings.

Field Type Required Possible values Description
type string true license_finding The rule's type.
branches array of string true if branch_type field does not exist [] or the branch's name Applicable only to protected target branches. An empty array, [], applies the rule to all protected target branches. Cannot be used with the branch_type field.
branch_type string true if branches field does not exist default or protected The types of protected branches the given policy applies to. Cannot be used with the branches field. Default branches must also be protected.
branch_exceptions array of string false Names of branches Branches to exclude from this rule.
match_on_inclusion_license boolean true true, false Whether the rule matches inclusion or exclusion of licenses listed in license_types.
license_types array of string true license types SPDX license names to match on, for example Affero General Public License v1.0 or MIT License.
license_states array of string true newly_detected, detected Whether to match newly detected and/or previously detected licenses. The newly_detected state triggers approval when either a new package is introduced or when a new license for an existing package is detected.

any_merge_request rule type

This rule enforces the defined actions for any merge request based on the commits signature.

Field Type Required Possible values Description
type string true any_merge_request The rule's type.
branches array of string true if branch_type field does not exist [] or the branch's name Applicable only to protected target branches. An empty array, [], applies the rule to all protected target branches. Cannot be used with the branch_type field.
branch_type string true if branches field does not exist default or protected The types of protected branches the given policy applies to. Cannot be used with the branches field. Default branches must also be protected.
branch_exceptions array of string false Names of branches Branches to exclude from this rule.
commits string true any, unsigned Whether the rule matches for any commits, or only if unsigned commits are detected in the merge request.

require_approval action type

This action sets an approval rule to be required when conditions are met for at least one rule in the defined policy.

Field Type Required Possible values Description
type string true require_approval The action's type.
approvals_required integer true Greater than or equal to zero The number of MR approvals required.
user_approvers array of string false Username of one of more users The users to consider as approvers. Users must have access to the project to be eligible to approve.
user_approvers_ids array of integer false ID of one of more users The IDs of users to consider as approvers. Users must have access to the project to be eligible to approve.
group_approvers array of string false Path of one of more groups The groups to consider as approvers. Users with direct membership in the group are eligible to approve.
group_approvers_ids array of integer false ID of one of more groups The IDs of groups to consider as approvers. Users with direct membership in the group are eligible to approve.
role_approvers array of string false One or more roles (for example: owner, maintainer) The roles to consider as approvers that are eligible to approve.

send_bot_message action type

FLAG: The availability of this feature is controlled by a feature flag. For more information, see the history.

This action enables configuration of the bot message in merge requests when policy violations are detected. If the action is not specified, the bot message is enabled by default. If there are multiple policies defined, the bot message is sent as long as at least one of those policies has the send_bot_message action is enabled.

Field Type Required Possible values Description
type string true send_bot_message The action's type.
enabled boolean true true, false Whether a bot message should be created when policy violations are detected. Default: true

Example bot messages

scan_results_example_bot_message_v17_0

scan_results_example_bot_message_v17_0

approval_settings

  • The block_group_branch_modification field was introduced in GitLab 16.8 with flag named scan_result_policy_block_group_branch_modification. Disabled by default.
  • The block_unprotecting_branches field was introduced in GitLab 16.4 with flag named scan_result_policy_settings. Disabled by default.
  • The scan_result_policy_settings feature flag was replaced by the scan_result_policies_block_unprotecting_branches feature flag in 16.4.
  • The block_unprotecting_branches field was replaced by block_branch_modification field in GitLab 16.7.
  • The above field was enabled on GitLab.com in GitLab 16.7.
  • The above field was enabled on self-managed in GitLab 16.7.
  • The prevent_approval_by_author, prevent_approval_by_commit_author, remove_approvals_with_new_commit, and require_password_to_approve fields were introduced in GitLab 16.4 with flag named scan_result_any_merge_request. Disabled by default.
  • The above fields were enabled on GitLab.com in GitLab 16.6.
  • The above fields were enabled on self-managed in GitLab 16.7.
  • Feature flag scan_result_any_merge_request was removed in GitLab 16.8.
  • The prevent_pushing_and_force_pushing field was introduced in GitLab 16.4 with flag named scan_result_policies_block_force_push. Disabled by default.
  • The above field was enabled on GitLab.com in GitLab 16.6.
  • The above field was enabled on self-managed in GitLab 16.7.
  • Feature flag scan_result_policies_block_force_push was removed in GitLab 16.8.

FLAG: On self-managed GitLab, by default the block_branch_modification field is available. To hide the feature, an administrator can disable the feature flag named scan_result_policies_block_unprotecting_branches. On GitLab.com and GitLab Dedicated, this feature is available.

The settings set in the policy overwrite settings in the project.

Field Type Required Possible values Applicable rule type Description
block_branch_modification boolean false true, false All When enabled, prevents a user from removing a branch from the protected branches list, deleting a protected branch, or changing the default branch if that branch is included in the security policy. This ensures users cannot remove protection status from a branch to merge vulnerable code. Enforced based on branches, branch_type and policy_scope and regardless of detected vulnerabilities.
block_group_branch_modification boolean or object false true, false, { enabled: boolean, exceptions: [string] } All When enabled, prevents a user from removing group-level protected branches on every group the policy applies to. If block_branch_modification is true, implicitly defaults to true. Enforced based on branches, branch_type and policy_scope and regardless of detected vulnerabilities.
prevent_approval_by_author boolean false true, false Any merge request When enabled, merge request authors cannot approve their own MRs. This ensures code authors cannot introduce vulnerabilities and approve code to merge.
prevent_approval_by_commit_author boolean false true, false Any merge request When enabled, users who have contributed code to the MR are ineligible for approval. This ensures code committers cannot introduce vulnerabilities and approve code to merge.
remove_approvals_with_new_commit boolean false true, false Any merge request When enabled, if an MR receives all necessary approvals to merge, but then a new commit is added, new approvals are required. This ensures new commits that may include vulnerabilities cannot be introduced.
require_password_to_approve boolean false true, false Any merge request When enabled, there will be password confirmation on approvals. Password confirmation adds an extra layer of security.
prevent_pushing_and_force_pushing boolean false true, false All When enabled, prevents users from pushing and force pushing to a protected branch if that branch is included in the security policy. This ensures users do not bypass the merge request process to add vulnerable code to a branch.

fallback_behavior

FLAG: On self-managed GitLab, by default the fallback_behavior field is available. To hide the feature, an administrator can disable the feature flag named security_scan_result_policies_unblock_fail_open_approval_rules. On GitLab.com and GitLab Dedicated, this feature is available.

Field Type Required Possible values Description
fail string false open or closed closed (default): Invalid or unenforceable rules of a policy require approval. open: Invalid or unenforceable rules of a policy do not require approval.

Security policy scopes

Security policy enforcement depends first on establishing a link between the group, subgroup, or project on which you want to enforce policies, and the security policy project that contains the policies. For example, if you are linking policies to a group, a group owner must create the link to the security policy project. Then, all policies in the security policy project are inherited by all projects in the group.

You can refine a security policy's scope to:

  • Include only projects containing a compliance framework label.
  • Include or exclude selected projects from enforcement.

Policy scope schema

Field Type Required Possible values Description
policy_scope object false compliance_frameworks, projects Scopes the policy based on compliance framework labels or projects you define.

policy_scope scope type

Field Type Possible values Description
compliance_frameworks array List of IDs of the compliance frameworks in scope of enforcement, in an array of objects with key id.
projects object including, excluding Use excluding: or including: then list the IDs of the projects you wish to include or exclude, in an array of objects with key id.

Example policy.yml with security policy scopes

---
approval_policy:
- name: critical vulnerability CS approvals
  description: critical severity level only for container scanning
  enabled: true
  rules:
  - type: scan_finding
    branches:
    - main
    scanners:
    - container_scanning
    vulnerabilities_allowed: 1
    severity_levels:
    - critical
    vulnerability_states: []
  actions:
  - type: require_approval
    approvals_required: 1
    user_approvers:
    - adalberto.dare
  policy_scope:
    compliance_frameworks:
      - id: 2
      - id: 11
    projects:
      including:
        - id: 24
        - id: 27

Example security merge request approval policies project

You can use this example in a .gitlab/security-policies/policy.yml file stored in a security policy project:

---
approval_policy:
- name: critical vulnerability CS approvals
  description: critical severity level only for container scanning
  enabled: true
  rules:
  - type: scan_finding
    branches:
    - main
    scanners:
    - container_scanning
    vulnerabilities_allowed: 0
    severity_levels:
    - critical
    vulnerability_states: []
    vulnerability_attributes:
      false_positive: true
      fix_available: true
  actions:
  - type: require_approval
    approvals_required: 1
    user_approvers:
    - adalberto.dare
- name: secondary CS approvals
  description: secondary only for container scanning
  enabled: true
  rules:
  - type: scan_finding
    branches:
    - main
    scanners:
    - container_scanning
    vulnerabilities_allowed: 1
    severity_levels:
    - low
    - unknown
    vulnerability_states:
    - detected
    vulnerability_age:
      operator: greater_than
      value: 30
      interval: day
  actions:
  - type: require_approval
    approvals_required: 1
    role_approvers:
    - owner

In this example:

  • Every MR that contains new critical vulnerabilities identified by container scanning requires one approval from alberto.dare.
  • Every MR that contains more than one preexisting low or unknown vulnerability older than 30 days identified by container scanning requires one approval from a project member with the Owner role.

Example for Merge Request Approval Policy editor

You can use this example in the YAML mode of the Merge Request Approval Policy editor. It corresponds to a single object from the previous example:

type: approval_policy
name: critical vulnerability CS approvals
description: critical severity level only for container scanning
enabled: true
rules:
- type: scan_finding
  branches:
  - main
  scanners:
  - container_scanning
  vulnerabilities_allowed: 1
  severity_levels:
  - critical
  vulnerability_states: []
actions:
- type: require_approval
  approvals_required: 1
  user_approvers:
  - adalberto.dare

Understanding merge request approval policy approvals

  • The branch comparison logic for scan_finding was changed in GitLab 16.8 with a flag named scan_result_policy_merge_base_pipeline. Disabled by default.
  • Generally available in GitLab 16.9. Feature flag scan_result_policy_merge_base_pipeline removed.

Scope of merge request approval policy comparison

  • To determine when approval is required on a merge request, we compare completed pipelines for each supported pipeline source for the source and target branch (for example, feature/main). This ensures the most comprehensive evaluation of scan results.
  • For the source branch, the comparison pipelines are all completed pipelines for each supported pipeline source for the latest commit in the source branch.
  • For the target branch, we compare to all common ancestor's completed pipelines for each supported pipeline source.
  • Merge request approval policies considers all supported pipeline sources (based on the CI_PIPELINE_SOURCE variable) when comparing results from both the source and target branches when determining if a merge request requires approval. Pipelines with source webide are not supported.
  • In GitLab 16.11 and later, the child pipelines of each of the selected pipelines are also considered for comparison. This is available with a flag named approval_policy_parent_child_pipeline.

Accepting risk and ignoring vulnerabilities in future merge requests

For merge request approval policies that are scoped to newly detected findings(new_needs_triage or new_dismissed statuses), it's important to understand the implications of this vulnerability state. A finding is considered newly detected if it exists on the merge request's branch but not on the default branch. When a merge request whose branch contains newly detected findings is approved and merged, approvers are "accepting the risk" of those vulnerabilities. If one or more of the same vulnerabilities were detected after this time, their status would be detected and so not be out of scope of a policy aimed at new_needs_triage or new_dismissed findings. For example:

  • A merge request approval policy is created to block critical SAST findings. If a SAST finding for CVE-1234 is approved, future merge requests with the same violation will not require approval in the project.

When using license approval policies, the combination of project, component (dependency), and license are considered in the evaluation. If a license is approved as an exception, future merge requests don't require approval for the same combination of project, component (dependency), and license. The component's version is not be considered in this case. If a previously approved package is updated to a new version, approvers will not need to re-approve. For example:

  • A license approval policy is created to block merge requests with newly detected licenses matching AGPL-1.0. A change is made in project demo for component osframework that violates the policy. If approved and merged, future merge requests to osframework in project demo with the license AGPL-1.0 don't require approval.

Multiple approvals

There are several situations where the merge request approval policy requires an additional approval step. For example:

  • The number of security jobs is reduced in the working branch and no longer matches the number of security jobs in the target branch. Users can't skip the Scanning Result Policies by removing scanning jobs from the CI/CD configuration. Only the security scans that are configured in the merge request approval policy rules are checked for removal.

    For example, consider a situation where the default branch pipeline has four security scans: sast, secret_detection, container_scanning, and dependency_scanning. A merge request approval policy enforces two scanners: container_scanning and dependency_scanning. If an MR removes a scan that is configured in merge request approval policy, container_scanning for example, an additional approval is required.

  • Someone stops a pipeline security job, and users can't skip the security scan.

  • A job in a merge request fails and is configured with allow_failure: false. As a result, the pipeline is in a blocked state.

  • A pipeline has a manual job that must run successfully for the entire pipeline to pass.

Managing scan findings used to evaluate approval requirements

Merge request approval policies evaluate the artifact reports generated by scanners in your pipelines after the pipeline has completed. Merge request approval policies focus on evaluating the results and determining approvals based on the scan result findings to identify potential risks, block merge requests, and require approval.

Merge request approval policies do not extend beyond that scope to reach into artifact files or scanners. Instead, we trust the results from artifact reports. This gives teams flexibility in managing their scan execution and supply chain, and customizing scan results generated in artifact reports (for example, to filter out false positives) if needed.

Lock file tampering, for example, is outside of the scope of security policy management, but may be mitigated through use of Code owners or external status checks. For more information, see issue 433029.

Evaluating scan result findings

Known issues

We have identified in epic 11020 common areas of confusion in scan result findings that need to be addressed. Below are a few of the known issues:

  • When using new_needs_triage and new_dismissed, some findings may require approval when they are not introduced by the merge request (such as a new CVE on a related dependency)
  • Findings or errors that cause approval to be required on a merge request approval policy may not be evident in the Security MR widget. With merge base introduced in issue 428518 some cases were addressed. Support for displaying more granular details about what caused security policy violations is proposed in epic 11185.
  • Security policy violations are distinct compared to findings displayed in the MR widgets. Some violations may not be present in the MR widget. We are working to harmonize our features in epic 11020 and to display policy violations explicitly in merge requests in epic 11185.
  • When merged results pipelines are enabled for the project, along with branch pipelines for created MRs, the comparison between source and target branches depends on the order in which the source branch's pipeline finishes. This can create race conditions, a resolution of which is proposed in issue 384927. The approvals may behave differently, depending on which target branch pipeline is selected.

Troubleshooting

Merge request rules widget shows a merge request approval policy is invalid or duplicated

DETAILS: Tier: Ultimate Offering: Self-managed, GitLab Dedicated

On GitLab self-managed from 15.0 to 16.4, the most likely cause is that the project was exported from a group and imported into another, and had merge request approval policy rules. These rules are stored in a separate project to the one that was exported. As a result, the project contains policy rules that reference entities that don't exist in the imported project's group. The result is policy rules that are invalid, duplicated, or both.

To remove all invalid merge request approval policy rules from a GitLab instance, an administrator can run the following script in the Rails console.

Project.joins(:approval_rules).where(approval_rules: { report_type: %i[scan_finding license_scanning] }).where.not(approval_rules: { security_orchestration_policy_configuration_id: nil }).find_in_batches.flat_map do |batch|
  batch.map do |project|
    # Get projects and their configuration_ids for applicable project rules
    [project, project.approval_rules.where(report_type: %i[scan_finding license_scanning]).pluck(:security_orchestration_policy_configuration_id).uniq]
  end.uniq.map do |project, configuration_ids| # We take only unique combinations of project + configuration_ids
    # If we find more configurations than what is available for the project, we take records with the extra configurations
    [project, configuration_ids - project.all_security_orchestration_policy_configurations.pluck(:id)]
  end.select { |_project, configuration_ids| configuration_ids.any? }
end.each do |project, configuration_ids|
  # For each found pair project + ghost configuration, we remove these rules for a given project
  Security::OrchestrationPolicyConfiguration.where(id: configuration_ids).each do |configuration|
    configuration.delete_scan_finding_rules_for_project(project.id)
  end
  # Ensure we sync any potential rules from new group's policy
  Security::ScanResultPolicies::SyncProjectWorker.perform_async(project.id)
end

Debugging security approval policy approvals

GitLab SaaS users may submit a support ticket titled "Merge request approval policy debugging". Provide the following details:

  • Group path, project path and optionally merge request ID
  • Severity
  • Current behavior
  • Expected behavior

GitLab SaaS

Support teams will investigate logs (pubsub-sidekiq-inf-gprd*) to identify the failure reason. Below is an example response snippet from logs. You can use this query to find logs related to approvals: json.event.keyword: "update_approvals" and json.project_path: "group-path/project-path". Optionally, you can further filter by the merge request identifier using json.merge_request_iid:

"json": {
  "project_path": "group-path/project-path",
  "merge_request_iid": 2,
  "missing_scans": [
    "api_fuzzing"
  ],
  "reason": "Scanner removed by MR",
  "event": "update_approvals",
}

GitLab self-managed

Search for keywords such as the project-path, api_fuzzing, and merge_request. Example: grep group-path/project-path, and grep merge_request. If you know the correlation ID you can search by correlation ID. For example, if the value of correlation_id is 01HWN2NFABCEDFG, search for 01HWN2NFABCEDFG. Search in the following files:

  • /gitlab/gitlab-rails/production_json.log
  • /gitlab/sidekiq/current

Common failure reasons:

  • Scanner removed by MR: Merge request approval policy expects that the scanners defined in the policy are present and that they successfully produce an artifact for comparison.